Coffee Filter holder for Melita #2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holder for Melita #2 coffee filters. Should also work for similar filters, but I have not tried others.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 582
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
This is a holder for Melita #2 coffee filters. Should also work for similar filters, but I have not tried.
The design is inspired from a couple of other holders I saw here
https://www.thingiverse.com/thing:4546103
https://www.thingiverse.com/thing:1709047
I needed something to stick on to my espresso machine , so I added holes for magnets. [6 X 3 mm]
I have designed it to use minimal material , and still retain the shape plus you can print this without supports. The orientation of the STL needs to be changed so that its printed in the right side up position to avoid supports.
You can go with 10-15% infill and it will be sturdy enough. I have printed this with a 0.6mm nozzle, 0.3mm layer height and 1.0 mm line width. Printed in around 50 minutes.