Hood Prop Clip for 87-93 Foxbody Mustang
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
OEM Hood Prop Clip for an 87-93 Foxbody Mustang (may work on earlier years but do not have one to test).
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 162
- Wydruki
- 1
- Wyświetlenia
- 607
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
This was scanned from an OEM hoodprop. I have printed this in Polylite ASA and mounted it on my car. The provided orientation provided the best quality on visible surfaces especially after vapor smoothing but you can easily print this on the side or with the opposite end faced up, all orientations will require support material.
Captured using a Revopoint Mini.
Print Settings
Supports: Touching Buildplate
Material: PETG, ABS/ASA or above.
Vapor Smoothing/Painting
I have included a stand you can print to rest the part on when vapor smoothing or painting. If you are vapor smoothing an ABS/ASA part you will want to print this in PETG. Vapor smoothing will leave a small indentation on the underside of the part but it has no affect on the fitment or visual appeal once mounted on the vehicle.