Christmas Village Fence
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of 30mm tall fences for use in my mother's Christmas village. The fences are made with individual fence posts…
- Ocena
- 5 / 5
- Polubienia
- 364
- Pobrania
- 1594
- Wydruki
- 7
- Wyświetlenia
- 4590
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial
A set of 30mm tall fences for use in my mother's Christmas village. The fences are made with individual fence posts and fence segments that connect them. Everything connects together with a press-fit mortise and tenon. Small bases can also plug into the bottom of the posts for added stability.
There are three types of posts: end posts that only accept a fence segment on one side, middle posts that accept them on both sides, and corners that accept them at right angles.
There are three types of fence segment: a simple picket fence, a picket that alternates front/back, and a wrought iron fence.
The removable bases also allow for the base to printed in a different color than the fence. All mine are printed in white so they match the snowy Christmas village backdrop.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.16
Infill:
20%
Filament: Esun PLA+ White, Black, Brown
Notes:
The fence segments are designed to be printed flat. The posts are laid down on one side. I print the middle segments with the holes parallel to the build surface, but you may need to experiment with your printer.
There is a 0.1MM clearance between the 2mm mortise and 1.9mm tenon. This makes for a nice press fit on my Ender, but I don't know how well it will work for your printer if it holds to different tolerances.Category: Buildings & Structures