GoPro mount on 3d printer frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you want to mount your gopro or other type of action cam with a gopro mount to your 3D printer frame for some…
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 2901
- Wydruki
- 0
- Wyświetlenia
- 15 030
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
If you want to mount your gopro or other type of action cam with a gopro mount to your 3D printer frame for some timelapse video, then this is the mount you should choose.
There are currently 2 versions, straight version and a round version with 45 degree tilt.
What you need:
A set of thumb screw.
2 M3 bolts/screws and a holding nut.
Feel free to visit my github repo for more design. I use FreeCAD for designing so you should get the original design and do changes easily. https://github.com/t-liu93/Home-Improvement-Mechanical-Design
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
50%
Filament: DevilDesign PETG Transprant
Notes:
You can use PLA for that but if your printer is in a closure and you are printing ABS or PETG with very high bed temperature, then choose a more heat resistant material.
I used 50% infill but I think less should also work.Category: 3D Printer Accessories