Magic: The Gathering +X/+X Counters (+1/+1, +1/+2, etc)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MTG counters that are easy to see from across the board. Includes a customizable version for non-equal power/toughness.
- Ocena
- 5 / 5
- Polubienia
- 95
- Pobrania
- 437
- Wydruki
- 2
- Wyświetlenia
- 3035
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Various types of +X/+X counters for Magic: The Gathering. These are easy to see from across the board and can be printed on both FDM and SLA 3D printers. Included are two types:
- Equal power/toughness counters (+1/+1, +2/+2…+10/+10)
- Custom counters for unequal power/toughness (i.e. +1/+2). The unequal version consists of number tiles from +0 to +9 that can be inserted into the bracket (via dovetail) and can create any combination of single digit counters. There's just enough friction to retain the tiles in the bracket but not too much that would prevent the tiles from sliding out when you need to swap them out.
When printing with FDM, I used 0.125mm layer height since most of the chamfers are 0.5mm or 0.75mm.
Since I do not own a dual extruder printer, these are designed to be printed in one filament color then the numbers are to be painted with a paint pen afterwards. I used an ultra-fine tipped oil-based paint pen.