LOVE Gimbal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Share your love of 3D printing with a LOVE gimbal. Ongoing series of models based on thing:100362 by Bluebie.…
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 67
- Wydruki
- 1
- Wyświetlenia
- 231
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
Share your love of 3D printing with a LOVE gimbal. Ongoing series of models based on thing:100362 by Bluebie. Demonstrating the power of customizing/personalizing/remixing designs in the physical world
Instructions
Based on an original design by Bluebie. http://www.thingiverse.com/thing:100362
Learn how to customize your own gimbal at http://designmaketeach.com/2014/05/06/3d-design-personalize-a-gimbal/
Printed at 0.2mm layer height on a Metal Printrbot Simple.
Please leave a comment or contact me on Twitter @DesignMakeTeach or on Facebook at Facebook.com/DesignMakeTeach. I love to talk with teachers, designers and makers about 3D printing and Learning by Making.
This design should print nicely on a Printrbot Metal Simple with no raft or support. Should spin right off the print bed with minimal work. If the rings are fused, try adjusting the filament diameter. I usually start by adding 0.1mm to the measured diameter of the filament I am using. If the filament measure 1.68mm using digital calipers, I will tell me slicing software that the filament diameter is 1.78mm.
Category: Decor