1 / 5
X5SA X Carriage Upgrade (belt tensioner)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you want a belt tensioner, this one will work and help to align the wheels better on the X carriage. The belt will…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 293
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
If you want a belt tensioner, this one will work and help to align the wheels better on the X carriage.
The belt will be able to be adjusted using a m3 screw, I used 2 x 30mm m3 screw. The belts is tie rapped on the sliding pieces.
You need to print 2 sliding pieces, the main piece and the back, the back remove around 1.5 mm (compared to the old washer) to give more space for the m5 nut.
Category: 3D Printer Parts
