1 / 1
Toyota Landcruiser 100/105 series switch plate
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed to fill the holes in the cruiser left over from the previous owner not installing switches correctly etc. I…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 146
- Wydruki
- 0
- Wyświetlenia
- 948
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
Needed to fill the holes in the cruiser left over from the previous owner not installing switches correctly etc.
I tried to make it match the curved surface, however that was too hard to print so decided on a flat plate.
Use this as a basis for creating holes in the center to install switches and leds etc.
Printed in both ABS and pla, both work without an issue
Print Settings
Printer:
FLSun Kossel Mini
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
25%
Category: Automotive
