1 / 4
Squash Ball Dampener and Leveler Feet for Artillery Sidewinder X1 — zdjęcie 1
1 / 4

Squash Ball Dampener and Leveler Feet for Artillery Sidewinder X1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Feet for Artillery Sidewinder X1, made up of two parts which are assembled by a thread, providing damping and leveling

Ocena
0 / 5
Polubienia
7
Pobrania
42
Wydruki
0
Wyświetlenia
400
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

Feet are made up of two parts. You will need four of each part, and four additional squash balls (39 mm diameter).

Balls locations are a little closed (shape is a little more than a half sphere) to keep the balls in place if you need to move your printer. 

Good results are obtained with two yellow dots balls, like these ones https://amzn.eu/d/5tN1lLq

Of course you need to open the printer case, so do not install these feet if your printer is under waranty 

Enjoy and please give feedback if this model can be improved

 

Print Instructions

No supports needed for printing,  but brim is highly recommended

.2 layer, 20% infill

Tagi