Filament Spool Holder - Roller Style - Easy Print - Two Styles - Adjustable or Fixed

If you find this thing useful, please consider sending a tip. :)
https://paypal.me/cdsmakestuff
https://www.venmo.com/u/cdsmakestuff

Filament Spool Holder - Roller Style

Easy to print and assemble
Adjustable version for different size spools or
Fixed size version for large (standard) spools

--------HARDWARE---------

1/2" PVC Pipe for roller - 95mm long x2
608 "Skate" Bearings - x4
3/16" (8mm) x 5/8" (15mm) Wood Dowel - x4
Masking Tape
Glue (super glue, gloop, epoxy, whatever works)
10mm Non-Skid Self Adhesive Silicone or Rubber Pads - x4

--------PRINTED PARTS-------

Sides (choose type A or B)
Ends
Roller Endcap

--------TOOLS-------

Saw to cut PVC (must be cut as square as possible)
Saw to cut Wooden Dowel
         *Fine tooth hobby saw will work well for both the above
X-acto or similar hobby knife

--------TIPS / INFO--------

PRINTING:
Print settings (recommended min. w/ 0.4mm nozzle) - PLA - 3 walls, 4 bottom, 4 top, 20% infill.
Acetone and paper towel will quickly and easily clean up the PVC pipe parts.
The ends of the PVC pipe need to be cut as squarely as possible to ensure smooth rolling.
Two layers of masking tape on the flat side of the roller endcap act as a shim for the bearing (see photo).
You may or may not need to glue the sides to the end pieces depending on fitment… I preferred to glue them wanting a permanent joint.