1 / 6
Atlas 7B shaper - S7-68A disc and gear
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Warning! Experimental! This part is still being refined and tested.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 430
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
Warning! Experimental!
This part is still being refined and tested. I am posting it here for anyone who would like to try it out.
This is a replacement part for an Atlas 7B metal shaper, specifically the "S7-68A disc and gear." As designed, this part requires that metal bushing be made to fit the part, as shown in the drawing (see photos).
The OnShape 3D CAD files for this part are available here:
Print instructions
My test print was in PETG, gear side up (note: gear side down may be better, still experimenting with this).
- 0.2mm Quality
- supports everywhere
- z contact distance set to 0.2
- perimeters = 10
- fill pattern rectilinear
- top fill = concentric
- bottom fill = concentric