Miranda Titan 404 Tripod Gimbal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Complete reverse model of the plastic components of a Miranda Titan 404 tripod gimbal.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 909
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
This is a full CAD model of the three main plastic gimbal components of a ‘Miranda Titan 404’ tripod - I believe - it was acquired second hand and had been heavily ‘repaired’! All the three large plastic components (orange, red and yellow components in the images) were cracked and heavily glued back together.
As far as I know, this will be very specific to the tripod model in question, as it requires all the other components from the tripod head (nuts/clips/screws/handle/etc.).
Files
It is slightly modified in a few places to print better, but none of the parts are perfect for 3D printing. The do all print okay with supports though. I've included the unmodified files too (v1 = original / v2 = modified).
The 'Gimbal Ass'y' file also contains copies of the knob and threaded shaft - but these parts were a bad fit on my tripod. They may not be original parts.