1 / 1
Bear 2/2.1 Y belt holder for straight belt path
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alternative Y belt holder for the Bear 2.0/2.1 builds
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 65
- Wydruki
- 1
- Wyświetlenia
- 440
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (15)Powiązane
Y belt holder compatible with all full Bear upgrade versions (2.0/2.1) when using one of the following custom y idlers:
- Tensioner with 20T 5ID Gates toothed pulley + dowel pin
- Tensioner with 20T 5ID Gates toothed pulley + M5 screw
- Tensioner with 20T 3ID stock smooth pulley + M3 screw
When used with Bear 2.1 this works as the Y endstop.
It's a simple rework of the extremely simple and effective original MK3 belt holder. Overall with this holder&tensioner, the axis is simpler, more rigid and requires less parts.