gbaHD AIO Shell
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shell for the gbaHD All In On shield for a consolized GBA
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 1112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a custom shell for the gbaHD AIO Shield by Zekfoo
find more information here https://github.com/Zekfoo/gbaHD-AIO-Shield
This is for use with the gbaHD Project which requires a dev board for the FPGA functions learn more here. https://github.com/zwenergy/gbaHD
Zekfoo's board I recommend using his PCBWAY link so that he gets some monetary support for his work.
This is an advanced project that requires the removal of the CPU, RAM, and Cartridge connectors from a real GBA console Then transplanting these parts onto the new shield board.
Additionally you will need to source a power button to fit the opening on the front of the console, in my case I am using a small round latching push button switch with a diameter of 12mm similar to this one
You will also need
6x M2x6mm tapping screws
2x M3x6-8mmm tapping screws.
4 rubber dome feet.
We do sell this item printed at https://www.laserbear.net/products/gbahd-aio-shell including all the screws and feet. You will still need to source the power button and the parts to build the consolized GBA