Tent Enclosure Corner Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
45 degree brackets that clamp to 16mm rods for tent style enclosures (Creality)
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 410
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Taking inspiration from devrandom and his Bracket model, I made a new model that is light, prints in about 3 hours, and has multiple uses, as I did not plan to mount a spool with the bracket.
This will fit any pop-up/tent enclosure with 16mm rods, but the original models are attached.
I am using this so far to mount a smoke detector (pictured) and my webcam within the enclosure.
Bracket can sit on top of the rails with no issues. Side mounting needs zip ties to secure it. I also modeled an optional back clamp with matching profiles and zip tie holes.