Battery Base and Tripod Mount for Cogley's Animatronic Eyes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple tripod mount for Will Cogley's 3D printed animatronic eyes with a magnetic slot for a 4xAA battery case
- Ocena
- 0 / 5
- Polubienia
- 44
- Pobrania
- 159
- Wydruki
- 0
- Wyświetlenia
- 2424
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
Built to connect with Will Cogley's wonderful 3D printed animatronic eyes, which can be found HERE.
More information about my build specifically can be found HERE.
This was created to make display and movement easier for a public open-house event. As such, it heavily used materials already present. A standard 4xAA battery box can be locked into the base with magnetic retaining arms. Arms use 3mm thick 8mm diameter magnets, which are dropped in using the pause print command. A ¼" standard nut can be dropped in the same way to create the embedded tripod mount.