Stalker Bear detector advanced parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an improved antenna, buttons and display for this Stalker Bear Detector.
- Ocena
- 0 / 5
- Polubienia
- 94
- Pobrania
- 561
- Wydruki
- 1
- Wyświetlenia
- 4674
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution
This is an improved antenna, buttons and display for this Stalker Bear Detector.
With these improvements you'll find artifacts in no time!
Print instructions
The antenna part has quite a lot of thin parts. With FFF 3D printers it may be challenging to print and prone to breaking.
The best way to print antenna is using an SLA printer with flexible resin. This way you'll get nice detailed model that will survive carrying in your pocket or deep in the bag.
Print the displays fade down on the smooth sheet. The flat solid part should be printed with Prusament neon green PETG, signs and other structures with black PETG.
Glue the parts to the housing, place some LEDs inside and enjoy the slavic apocalypse!