ESP8266 Lolin V3 Case (+ Power connector)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple and small case for the ESP8266 Lolin V3. It is completely screw-less and can be opened and closed via…
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 154
- Wydruki
- 1
- Wyświetlenia
- 822
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a simple and small case for the ESP8266 Lolin V3. It is completely screw-less and can be opened and closed via clicking together. (Sometimes the ESP's USB connector is to far away from the cover. Just break the the holder inside an hot glue it ;)
This case also includes a cut-out and positioning for a 5.5 x 2.5 DC Power Connector in the case top.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
15%
Notes:
Print both parts with the surface down. It can also be printed without support, but the cutouts are getting a bit ugly.
Category: 3D Printing