Direct drive mount for BMG clone on Ender pro (Drivinator remix)

This is a redisign of the Drivinator remix to fit with the Ender 3 or the Ender 3 pro. I changed the hole to fit with the ender 3 x axis bracet and removed any unecesessary holes.It works with this BMG clone version from aliexpress https://www.aliexpress.com/item/1005002945353129.html?gatewayAdapt=4itemAdapt (right transparent or black). The screws included with the BMG are long enought to fit. It probably works with other clones too but it is not tested.

The PTFE tube should be about 75.5mm

Cable Managment

There is a hole in the mount where the cables from the hotend come. In this hole you can tire up the cables and secure them in place. 

Also I recommend this design https://www.printables.com/model/189849-ender-3-cable-front-cable-retention that ensures stability since the cables are connected to the x axis( optional but recommended).

Another thing to keep in mind is that if you are using bltouch you will have to cut the mount horizontally in the midle of the big hole. This is needed because the direct drive mount covers the area where the bltouch mount would normally go.

SLICER NOTES

First of all you need to print this with PETG. If not the motor's high temperatures will eventually deform and even worse melt the plastic.

To ensure stabillity you will also have to set the infill to 30-45%

As for the supports you can use whatever suits your machine.