Interkrenn TB 13/5 Depth Gauge Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Depth Gauge Replacement This is a Replacement Unit for the Depth Gauge on the TB13/5 Drill Press. The Depth Gauge is…
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 52
- Wydruki
- 1
- Wyświetlenia
- 483
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Depth Gauge Replacement
This is a Replacement Unit for the Depth Gauge on the TB13/5 Drill Press. The Depth Gauge is copy of the Original one that came with this machines.
Fitment
About the Fitment I know that it will fit on the
Interkrenn TB13/5
and the
YANG ZHOU FEIDA ELECTRIC MOTOR & INSTRUMENT CO. TB13/5 (basically a Chinese 1:1 Copy of the Interkrenn).
But I don't know if it will fit on other types of TB13/5 Drill Press from other Manufactures, because there were I think 3 different Types of Brackets for these machines. This is the Type-3 Bracket.
Needed Material
You will need:
- 1 x M8 Rod (120 mm long)
- 4 x M8 Nuts
Mounting for the Drill_Press_Holder.stl:
- 1 x M4x30mm Bolt
- 1 x M4 Nut
Mounting for the Drill_Press_Gauge_Pointer:
- 1 x M3x8mm Bolt (but M4 should also be fine)
- 1 x M3 Nut
Installation
I think the Installation process is pretty straight forward just by the Pictures ;).
Small little tip, when you install the holder you need slide it above the drill chuck at the connection rod.
Control
You can control the Depth by adjusting the two loose Nuts on the M8 Rod and looking at the Gauge Pointer. When you decided your exact depth you need to Jam the two Nuts together or they will start rattling while drilling.
Category: Replacement Parts