Gridfinity Window Bin Easy Stacking Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
stacking rack for Zack Freedman's Gridfinity Window Bin Storage
- Ocena
- 0 / 5
- Polubienia
- 85
- Pobrania
- 220
- Wydruki
- 0
- Wyświetlenia
- 2565
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I use Zack Freedman's gridfinity storage especially the windowed bins and although being able to stack them is good if I want an item from anything but the top bin, I have to move everything above the one I want, so I created a stacking system for them. Each bin can be removed without disturbing the ones above or below. I made the plates 4x2 my intention was to stand the rack on a turn table so I could have easy access to both sides.
I have left a 3.2mm hole running through all supports and plates to accept a 3mm rods (1 in each corner) if you want to add additional rigidity to the storage
have added a base plate that will accept brass inserts for 3mm threaded rod if you want to tie everything together
Added a 1x2 version same system
binarypickle@binarypickle_239529 Gridfinity Window Bins - 2x Tall, 2x Deep works well with this rack
Gridfinity Window Bins - 2x Tall, 2x Deep by binarypickle | Download free STL model | Printables.com