Prusa MK3S / MK3S+ Z-Axis Rattle and Noise Fix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cap for Z-Axis screw.
- Ocena
- 4,778 / 5
- Polubienia
- 147
- Pobrania
- 751
- Wydruki
- 16
- Wyświetlenia
- 4208
- Oceny
- 18
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I have Z-Axis rattle noise since I have my MK3S+ and searched multiple fixes.
Including here I found some.
But nothing seemed to fix the issue that I have.
However thanks to sabaatworld I actually found out why I have this noise.
He has this model: https://www.printables.com/model/254641-prusa-mk3s-mk3s-z-axis-rattle-and-noise-fix
It didn't really fix my problem, but from that I learned why I have the noise.
I created 2 very simple caps, these go on top of the Z-Axis rods and fit exactly onto the rod and into the holder, so the Axis can freely rotate without any issue, but it has very little play.
I put a tini bit of grease between the holder and the cap.
Thanks to sabaatworld.