1 / 8
G-Wagon - 3D printed 4x4 RC car (Chassis)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed G wagon, 1/12 scale RC scale model chassis with open differential and realistic suspension.
- Ocena
- 3 / 5
- Polubienia
- 509
- Pobrania
- 2498
- Wydruki
- 1
- Wyświetlenia
- 20 048
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (18)Wydruki i komentarze (Wydruki: 1) (Komentarze: 84)Remiksy (0)Kolekcje (571)Powiązane
G wagon - True scale model
After months of designing and testing, The design is finally ready.
A Performance RC model with offroad capabilities. The chassis has ~150 printed parts.
Join our :Discord
The body for this Chassis can be downloaded here: https://www.printables.com/model/308760-rc-g-wagon-body/
Features:
- Accurate 1/12 Scale
- Fully 3D printed (including shock absorbers)
- Full time AWD
- Open Differentials
- Independent front suspension
- 30kmph Top speed
- 100% slope climbing
CHASSIS ASSEMBLY:
Part 1 - Chassis frame & Rear suspension assembly
Part 2 - Motor drive assembly
Part 3 - Steering and Front differential assembly
Part 4 - Front suspension & final assembly
Shock Absorbers:
The 3d printed shock absorbers need a M2 20mm screw and a pen spring.
Notes:
- With a 3S battery, this model can reach upto 30kmph! before the gears start melting. So it is recommended to use 2S battery and low KV (1000-1400) motor. Lubrication recommended for the gears.
- Cura 5.0 above is the recommended slicer for this model. Rafts and Supports are generally better in Cura.
- The 3mf files were generated with Cura Slicer.
- The provided files have support blockers which may open as normal models in other slicers. You may have to manually assign them as support blockers.
Print settings:
Cura 3MF file