Gear Cuff Fidget Bracelet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fidgetable Fashion! More "charms" and sizes are in the works and we welcome suggestions <3
- Ocena
- 5 / 5
- Polubienia
- 123
- Pobrania
- 192
- Wydruki
- 1
- Wyświetlenia
- 3411
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Hole measures 73mm in diameter and 42mm deep, with the cuff and larger gears being flexible. The smaller pinion gears and their stays can be added after fitting the cuff and are rigid.
The little "spikes" have an M6 bolt pattern and can be replaced with other objects.
The bracelet and larger outer gears should be printed in TPU. Beef up the retraction and use good filament to keep the stringing down.
The inner gears, screws and retainers can be PLA, or really anything.
See it in action! https://www.tiktok.com/@witmakes/video/7138873643592895790