Elegoo Neptune 2S BTT SKR Mini E3 V3 Adapter Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter plate to fit the BigTreeTech SKR Mini E3 V3 inside the Elegoo Neptune 2S
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 992
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a quick adapter plate I whipped up to mount the BigTreeTech SKR Mini E3 V3 inside the Elegoo Neptune 2S. I wanted to avoid printing a new electronics enclosure entirely. I don't know if the original Elegoo Neptune 2 has the same layout underneath, but if it does, this will work for you.
Please note that this setup is fully intended on you using Klipper, as the USB port and MicroSD Card slot are inaccessible without taking the underside panel off.
I have provided the .STEP file in case anyone has issues with hole alignment and wants to modify it themselves. I made this in three test prints and I noticed the holes were ever so slightly off. It worked though!