1 / 1
Treasure Garden Umbrella Topper (Finial) Replacement : Wild Hippo Edition
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lost the top of your umbrella ? Fix your Treasure Garden umbrella top in style with this two part print.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 347
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
This is designed to replace the finial on the top of Treasure Garden Umbrellas if you've broken yours or you want to spice your topper up.
Printed in 3 parts in PLA and glued together with superglue:
- TreasureGardenUmbrellaTopPedestal : a generic part that screws into the top of the umbrella. It has an alignment cylinder hole in the center.
- Alignment Pin: The alignment pin, for joining the top and bottom parts reliably. You put this into the first part , add glue, and put the last part on top.
- HippoTopper: In this case, a combination of a hemi-sphere and some hippo heads I made, but you could put whatever you like on top! If you make your own, remember to put a hole in for the alignment pin!