Home Assistant Yellow Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3D print optimized version of the original Home Assistant Yellow enclosure.
- Ocena
- 4 / 5
- Polubienia
- 48
- Pobrania
- 476
- Wydruki
- 1
- Wyświetlenia
- 6218
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is the original enclosure for Home Assistant Yellow optimized for 3D printing. Compared to the transparent enclosure shipped with Home Assistant Yellow, it has a few adjustments which make it more suitable for 3D printing, in particular:
- Backplate has a flat bottom side
- Backplate corners are adjusted to avoid overhang
- Backplate is thicker to avoid warping
- Holes for the enclosures are adjusted to fit off the shelf threaded inserts (see below)
The enclosure should print reasonable well with standard settings. The model is rotated in print orientation already.
The top part has 4 holes for thread inserts. They should work with off-the-shelf M3x5.7mm threaded inserts, e.g.
- Gewindeeinsatz / threaded insert M3 Standard 100 Stk / pcs from CNC Kitchen
- Threaded Inserts (50-piece set) from 3D Jake
Use a soldering iron to melt them in place. See Tips & Tricks for Heat-Set Inserts used in 3D printing on CNC Kitchen or a video of the process in this Twitter thread.