Elegoo Neptune 3 BMG direct drive mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Direct drive BMG extruder mount for the Elegoo Neptune 3.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 1250
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Direct drive BMG extruder mount for the Elegoo Neptune 3. Remixed from https://www.thingiverse.com/thing:5532317. This upgrade consists of two parts, an M10 thread to groove mount adapter, and a mount for the stepper motor and BMG extruder. A short length of PTFE must be added inside of the M10-groove adapter. M3 washers may be placed between the extruder and mounting plate if there is a gap.
I printed the model in PETG but PLA+ may offer better rigidity. The model flexes while extruding which can crack the M10 to groove adapter although it still performs its intended function of restraining the PTFE tube. I am working on an updated design to address this issue.
The model should be printed with at least 3 walls, 60% infill, with 0.2 mm or thinner layers