Wanhao Duplicator 6 Spool holder bearings insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I felt a bit compelled printing tubes and finding M8 bolts. So instead I've designed an insert which has bearing to…
- Ocena
- 1 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I felt a bit compelled printing tubes and finding M8 bolts. So instead I've designed an insert which has bearing to decrease spool friction using a pair of 625 and one 624 bearings. Insert goes into existing spool holder turned upside down.
You'll need:
2x 625 bearing
1x 624 bearing
2x M5 socket head screws (minimum length is 10mm)
1x M4 button head screw (minimum length 14mm)
1x M4 nyloc nut
Print Settings
Printer Brand:
Wanhao
Printer:
Duplicator 6
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: Locally produced PLA Transparent
Category: 3D Printer Parts