Boss pedal clip in holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a way to add BOSS pedals to my board where the Velcro won't stick well to the rubber base, with out removing…
- Ocena
- 5 / 5
- Polubienia
- 91
- Pobrania
- 643
- Wydruki
- 4
- Wyświetlenia
- 3031
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a way to add BOSS pedals to my board where the Velcro won't stick well to the rubber base, with out removing it or damaging the sticker on the bottom. I wasn't a fan of the designs on here already so designed my own through several iterations.
The final design is a simple clip in design. Hook in at the front, push down at the back.
The standard file is that in the photos and the video. But I noticed a fair bit of flex, if that is a problem for you then try the "thicker" file where the corner walls and the base are all a lot thicker. You will probably find it harder to get the pedals in and out though. I have not printed the thicker version so any issues let me know