Ender 3 V2 conversion kit for Ender 3 Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn your Ender 3 Pro into an Ender 3 V2 using the Ender 3 Pro's LCD mount. The only prerequisit is that the Ender 3…
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 3448
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Turn your Ender 3 Pro into an Ender 3 V2 using the Ender 3 Pro's LCD mount. The only prerequisit is that the Ender 3 Pro needs to have a Crealily 32bit board (either v4.2.2 or v4.2.7) and install the appropriate firmware. I strongly recommend Jyers firmware as is leagues above the stock one.
The parts are best printed in PLA with 100% infill and brim for extra adhesion.
The LCD back cover's mounting holes need to be drilled and tapped to M3. Additional hardware needed consists on 2 M3x10 allen head bolts, 4 M3x15 countersunk bolts and 4 M3x5 allen head bolts.
This modification will NOT work with Ender 3 Neo due to the different architecture of the toolhead shroud. One workaround is the purchase of the extended display bracket for Ender 5 series/Ender 3 Max and the other is using the bracket that is shipped with the V2 display.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
100
Filament: Generic PLA black
Category: 3D Printers