Cloths Rack Replacement Brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement brackets for a cheap clothes rack that was destined for landfill.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 16
- Wydruki
- 2
- Wyświetlenia
- 174
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Very quick and dirty replacement end caps and cross braces for the pictured cheap and crappy clothes drying rack. First the original end caps broke then about a year later the cross braces. Have slowly been replacing all of the original plastic bits with 3D printed versions.
Just waiting for the end plugs to disintegrate after which I'll do those do and add them here. Not sure if anyone else on earth is still using one of these particular drying racks but if you are, give it a bit of extra life and save it from the landfill.
Printed in PLA, 4 perimeters in the orientation found in the files. If you have something similar and just need to change some dimensions, here is the original Onshape public document you can use.