JGAurora A5, A3S X motor Cable holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This my 3rd design of this it work great. It connects simply onto the x motor not affecting any of your prints.…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This my 3rd design of this it work great. It connects simply onto the x motor not affecting any of your prints. Unfortunately they way it clamps onto the x motor means that you will loss 8mm of your total hight meaning you can only print to a maximum hight of 312mm. The cable slides into the little support that I made so it will no long get stuck with the bed cable. Any problems let me know and I will fix them or improvements you may have.
IMPORTANT:
- This will remove 8mm from your maximum z height
- This design can be used for A5 and A3S
Print Settings
Printer:
JGAURORA A5
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
25
Notes:
the first 2 or so layers print at half speed but should be all good.
Category: 3D Printer Accessories