1 / 6
Thermomix TM6 (and TM5) Egg Splitter and Funnel — zdjęcie 1
1 / 6

Thermomix TM6 (and TM5) Egg Splitter and Funnel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

2 objects to be printed here - a funnel and an egg splitter that both fit in the hole of the Thermomix cover. I…

Ocena
5 / 5
Polubienia
23
Pobrania
160
Wydruki
2
Wyświetlenia
1300
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

2 objects to be printed here - a funnel and an egg splitter that both fit in the hole of the Thermomix cover.

I designed them for the TM6 but the hole size is the same so they should also work for TM5.

Use FOOD SAFE filament- PETG for example.

I printed with 3 walls which makes it sturdy.

Tip to use the egg splitter:

  • Put in the cap hole
  • Crack the egg in it
  • Slowly spin the egg splitted in the hole (not to hard)

I included the Fusion 360 file if anybody wants to modify it.

Print Settings

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

15%

Filament: any PETG

Notes:

Use PETG!!! It needs to be foods safe and PETG is.

Check the images with the tips - the funnel should be printed up side down to avoid having to use support.

Category: Kitchen & Dining

Tagi