Spray Paint and can holder (by the bottom - horizontally
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hold your spray paint cans against a wall in little cut tubes. Very efficient space saving. Note: you need to print…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 854
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
Hold your spray paint cans against a wall in little cut tubes. Very efficient space saving.
Note: you need to print this in a fake* vase-mode:
(this print won't work in standard vase more - spiralized contour - but it will it you simulate the same parameters)
Slicer settings:
- 3 bottom layers
**No top layer (0) (yes - that's zero layers. It won't print the top)**No Infill (0% infill)
- Single wall (size of your nozzle)
- Got the best results with 0.6mm nozzle - 0.38mm layer height - line width 1mm (yes, much larger than nozzle) with slower speed.
- Should work fine with 0.4mm nozzle, 0.32mm line height but in that case, select 0.6mm line width (line thicker than nozzle)
The design has tiny little spheres at the top of the tubes that connects the different tubes together. It makes it a stronger structure.
The idea is to put 3 screws in the bottom layer on a wall (or beam as in my case) (to in the top rows tubes, one in the bottom row).
This way you can push your spray paint cans in them.
Category: Organization