Charging Cable Holder for VW ID.3, ID.4, ID.5 and ID.7
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved version with lock! Charging Cable Holder for VW ID.3, ID.4, ID.5 and ID.7 for great accessability.
- Ocena
- 5 / 5
- Polubienia
- 177
- Pobrania
- 1756
- Wydruki
- 18
- Wyświetlenia
- 9764
- Oceny
- 18
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This cable holder attaches to the hook on the side of the trunk in the VW ID.3, ID.4, ID.5, and ID.7. Simply hang your charging cable over it for easier access and better organization.
NEW in v3: I added a click-lock mechanism that securely fixes the holder to the hook. This prevents the holder from falling off when you lift the charging cable off the hook.
Printing Instructions
Use at least 3 perimeters
Orientation: Place one of the openings flat on the print bed.
Organic supports are required
Refer to the PrusaSlicer screenshot to see orientation and supports
Do not use PLA. The holder may deform over time, especially when exposed to the heat that can build up inside a car. I recommend using a more heat-resistant material such as PETG, ASA, or ABS.
If you print this model, I'd really appreciate your feedback, rating, and likes! It helps a lot and lets me know how the design performs in real-world use.
You can also check out my other car accessory models.