Screw Mounted Gridfinity 5x5 Baseplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lightweight, filament-efficient 5x5 Gridfinity baseplate with 4x screwdown points
- Ocena
- 4,875 / 5
- Polubienia
- 81
- Pobrania
- 1562
- Wydruki
- 14
- Wyświetlenia
- 4777
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
18.08.23 Update: I have added a v2 with slightly optimized filament usage and 2 more screw holes (to make it easier to screw down in different locations if need be).
My design for a lightweight, filament-efficient version of a 5x5 Gridfinity baseplate that mounts down using 2x 4mm countersunk screws.
My design is 5x5 as it's the max size that can fit on an Ender 3's bed.
I printed mine using a 0.6mm nozzle and 0.3mm layer height with Cura 5.0 (Arachne). Other settings and nozzles should work just fine, though.
STEP file included so you can change things if you like.