Star Wars Z29 Skyhawk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model of a Z29 Skyhawk from Star Wars: The High Republic
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 153
- Wydruki
- 0
- Wyświetlenia
- 800
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
This is a model of a fighter seen in Star Wars The High Republic Adventures #12 during the attack on the Nihil Encampment on Dol'Har Hyde. Although it has not been confirmed, it would make a lot of sense for this fighter to be the Incom Z29 Skyhawk.
The Z29 Skyhawk appeared in the book Star Wars: The High Republic: The Rising Storm. It was the successor of the Z28 Skywing and an early predecessor of the Z95 Headhunter. The Z29 Skyhawk was manufactured by Incom Corporation at the Cyclor Shipyards.
The model is 33mm long, 26mm wide and 12mm tall. The version with peg is compatible with a small pin and base.
Print Instructions
Printed at 0.1mm layer height. Requires supports on builplate. A raft is recommended.
The ship is printed pointing up to reduce supports.
For Light and Life.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#