Ladder feet for multi-purpose foldable aluminium ladder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement feet for multi-purpose foldable aluminium ladder with ~47x19mm sized extrusion
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 407
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Simple feet made to replace standard rubber ones that have worn out and cracked on my old multi-purpose foldable aluminium ladder, where replacement feet are no longer available.
The design is the same shape & profile as the orginal feet, where the size of the extrusion used in this ladder is ~47x19mm and a non-symmetrical rectangular shape (see attached photo). Simply slide on the new feet but to secure properly the feet have 4mm holes in them to drill a 4mm hole into the ladder leg and fit a screw or rivet to fix the feet in place.
I have included a sample piece of the shape so you can complete a quick test print and confirm if it fits your ladder, instead of wasting a print of an entire foot only to find out it doesn't fit or a slight resize is required.
NOTE : I would NOT recommend using these feet on flat/slippery surfaces when the ladder is fully extended/flat (ie not in standard “A” shape) if printing in an solid filament - TPU is likely the option in these use cases.