Skull with Mustache (V2) - Candy Bowl | Halloween Decoration
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
12,88 € – 15,74 € netto (bez VAT)
Dla pliku: skullbowlstache_V2_0.2mm_PLA_MINI_15h28m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 14,31 € netto (środek widełek).
- Masa podana przez autora
- 155 g
- Czas druku podany przez autora
- 15,47 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Skull candy bowl with a mustache (Updated Version). Add a little style to your holiday. Happy Halloween!
- Ocena
- 5 / 5
- Polubienia
- 923
- Pobrania
- 2541
- Wydruki
- 30
- Wyświetlenia
- 9596
- Oceny
- 28
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution
*UPDATED to V2 - The mustache is now more robust. It prints very well, is sturdier than V1, and perhaps most importantly looks very suave (as all well-maintained mustaches do). I believe that this will print very well at smaller sizes if you want an M&M or Skittles bowl for the coffee table, but I haven't tried yet. [UPDATE: tried it. 50% works great as a skittles bowl, and its kinda cute!]
Original description:
So I was looking at the Realistic Skull Candy Bowl | Halloween Skull Decoration by Thinkable and my son said “You should print that with a mustache.” BRILLIANT!
Mustache design credit goes to Jstander and the The Stash model on Thingiverse.
I printed this with 5% infill as it is still very sturdy using PLA Plus and reduced the print time by a couple of hours (I went from about 17.5 hours with 10% down to around 15.5 hours at 5%.) You may be able to get away with even less if you don’t have kids trying to stand on it or something ;)
This time I’m including a .3mf file with my settings for your convenience. The support material is easily removed and finished product looks great.
- Printed @ 95% to fit Prusa Mini
- 5% infill
- .20mm layers
- .4mm nozzle
- Some supports on the underside and for the ‘stache. (See 3mf file)
Happy Halloween!! and please “like” this model if you like it :)