Strap Adjusters Bundle (with STEP and Fusion parametric model)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Strap adjuster pack (10, 15... 30 and 50mm strap width). If you need more options, there are STEP and Fusion file.
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 282
- Wydruki
- 3
- Wyświetlenia
- 939
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
How to print it?
It doesn't matter what kind of filament you use, this design works the same when printed with PLA, ABS or PETg. I tested similar design printed with PLA and it lasted more than a year of everyday using.
How to use user parameters in Fusion 360?
Go to Modify → Change Parameters.
Parameters window will pop up. Here you can find two parameters defined by me - strap_width and wall_width. Fusion will automatically calculate new geometry, it will also add extra 2mm to width for strap clearence.
“What if I have no sewing skills and replacement will be to hard for me”?
I prepared two-part solution, which require gluing, but you don't have to sew the strap around “solid” version. The glue you need depends on material you used. It can be ABS-juice, CA glue, or 2-part epoxy.
