Prusa Covid-19 RC3 Face Shield Cutting Stencil
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For those that don’t have a laser cutter, this stencil will allow you to mark out the top and bottom holes along with…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 135
- Wydruki
- 0
- Wyświetlenia
- 581
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Public Domain
For those that don’t have a laser cutter, this stencil will allow you to mark out the top and bottom holes along with the corner curves. Align it with the top of your clear sheet, draw or (carefully) cut around the corners and mark out the holes for the punch. Repeat at the bottom.
Print instructions
This uses the imported configuration from Prusa’s RC3 Face Shield for PETG. Apart from: top and bottom layers were changed to 2 for speed and layer height changed to 0.3mm, again for speed. It could look prettier, but it’s a stencil! Total height 2mm. Approx 2hr 15mins on a MK3S.
(Design based on Prusa's Visor PDF drawing)