Laptop Stand (14in+)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple laptop stand for the 16in Macbook Pro
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 66
- Wydruki
- 2
- Wyświetlenia
- 390
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
New - Leg V3 if you'd rather the front support be off of the table
New - Leg V2 updated with more support to prevent bouncing when the table is bumped
A simple laptop stand designed for the 16in Macbook Pro to use minimal filament. It should work with any laptop larger than around 14in. I printed mine on an Ender 3 V2 and it should be printable on anything with a 220x220mm bed.
I recommend printing with a dense structural infill option (grid, gyroid, hex… not lightning). You'll need 2 legs and 3 braces. PLA worked fine for me, but you may want to use a more stable filament like ABS or Nylon for longevity. There's a 0.4 mm tolerance on the slots, you should be able to adjust this for your printer by scaling the braces on 2 axes.