Lower Corner Hinge Plugs (for Prusa Enclosure V2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When assembling the V2 enclosure (https://blog.prusaprinters.org/mmu2s-printer-enclosure/), I noticed, as did others,…
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 290
- Wydruki
- 5
- Wyświetlenia
- 2189
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
When assembling the V2 enclosure (https://blog.prusaprinters.org/mmu2s-printer-enclosure/), I noticed, as did others, the M3x30mm screws would not thread into the the corner bottom front pieces. They're listed as:
- Prusa_MMU_enclosure_corner_bottom_front_left
- Prusa_MMU_enclosure_corner_bottom_front_right
If a plug is inserted on top of the M3x30mm socket head, the screw will be pushed completely into the part (thereby holding / stabilizing the hinge). Additionally, since this plug is flush with the bottom of the main corner pieces, it will be held in place when screwed to the Lack table.
Print instructions
Note: If the plugs are not flush, ensure that the hole is completely clear of support material such that the M3x30mm socket head is sitting completely inside.