Folding Pocket scalpel - Fully 3D printed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully 3D printed remix
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 226
- Wydruki
- 1
- Wyświetlenia
- 1102
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
i liked the look of the original but i hate using metal screws, finding the write size etc...
so i modified it to accept custom printed screws, which are much chunkier which also meant changing the frame to accept them.
print the screws at 100% fill and don't overtighten them, they're deliberately tight fitting and do require a screwdriver so its quite easy to overtighten them and they start trying to rip their way out the other side of the frame!
ive also made a more robust scalpel holder, it requires build plate supports due to a change in orientation but only a very small amount, the blade is then secured with a plug which you may need to trim depending on your print accuracy.