Toilet roll holder spool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement plastic pieces for a plastic, telescoping roll holding spool.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 114
- Wydruki
- 1
- Wyświetlenia
- 681
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
After years of use, the spool on my toilet paper holder broke. The toilet paper roll holder spool plastic turned brittle and broke. These are replacement plastic pieces and they reuse the spring from the broken spool. Approximate dimensions are provided to determine if it'll work with your application.
Printed in PLA galaxy silver with a 0.6 nozzle and a 0.2 layer height. The parts are an interference fit and are meant to snap together once and stay, but they are tight. I needed a clamp to force the parts together, so you may want to scale up the outer tube dimension by a few percent to ease assembly. Printed in the weak axis with the plugs up, but this shouldn't matter since the part is in compression most of the time.