Simple Card Wallet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple card wallet for up to 6 cards. One piece, no assembly.
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 322
- Wydruki
- 2
- Wyświetlenia
- 1880
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
A simple card wallet for holding up to 6 normal-sized cards. (Might hold less if your cards are thicker)
I designed this because all the card wallet models I could find were multi-part or required separate straps. So this model has only one part, with no assembly required, and works by itself.
To put the cards in or take them out, push the "retainer arm" with your index finger while sliding the cards with your thumb.
I've been using it daily for a year, and it has been working very well.
Just be careful not to not push the "retainer arm" too much - it is the most fragile part of the print, and bending it too much will irreversibly deform it.
This should be fairly easy to print.
Disable Supports.
I printed mine on my Ender 3, PLA, 0.4 nozzle, 0.24 layer height.