S22 Motor cable protector + gasket - Easy Print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Motor cable protector and gasket for S22 - Easy print
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 92
- Wydruki
- 0
- Wyświetlenia
- 420
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Work in progress!
The cable housing is working as is - the gasket is not watertight.
This is a motor cable protector housing for Kingsong S22 + gasket - Gasket is optional
Gasket should limit the goo needed when installing the motor cable - but you still need some goo
I have replaced my screws with M3x10 screws
Print the files as provieded - Support "build plate only"
Print the housing in PLA or whatever material you prefer
Print gasket in TPU
Support = Yes, auto, build plate only
Layer height = doesn't mater
Brim = optional on housing
Sharing & License
I don't want to restrict anyone from sharing. But. PLEASE share links to this printables page, not the STLs. Here's why:
- This is under active development. The STLs WILL CHANGE and get better.
- I get a small amount of credit on printables, that is all the kickback I get on this project. Then I can buy more filament, and experiment with more projects!