1 / 4
40g Elmer's Purple Glue stick Holder, With M3 Mounting Holes — zdjęcie 1
1 / 4

40g Elmer's Purple Glue stick Holder, With M3 Mounting Holes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed the original to hold a 40g stick. Can be mounted to a honeycomb storage wall with an M3 Insert.

Ocena
0 / 5
Polubienia
12
Pobrania
54
Wydruki
1
Wyświetlenia
308
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

I like the original model, but scaling that up to hold a 40g stick also made the walls rather thick and the mounting holes rather large.  I kept the original backplate, scaled the rest of the container up in X and Y only, closed-down the mounting holes to 3.5mm diameter and hollowed the cavity out a bit, to thin the walls and backplate.  

This model can be mounted the same way as the original, or mounted to the Honeycomb Storage Wall by RostaP using a button-head M3 bolt and one of the inserts incorporating an embedded M3 nut.

Tagi