1 / 3
Dog Scent Training Vessel - Pinecone
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a scent training vessel for dogs. It's shaped like a pinecone to help blend in outdoors.
- Ocena
- 4,857 / 5
- Polubienia
- 115
- Pobrania
- 987
- Wydruki
- 6
- Wyświetlenia
- 4277
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 6) (Komentarze: 25)Remiksy (0)Kolekcje (151)Powiązane
This is a scent training vessel for dogs learning or competing in scent work / nose work. You can place the scented object inside (such as a cotton swab infused with essential oils).
There are two sizes to choose from (the original, 64 mm high, and a larger one, 82 mm high). They both use the same cap size, but the larger one has a taller scent chamber.
Printing tips:
- Print the pinecone and cap as oriented in the .stl files.
- I needed a brim around the pinecone.
- The cap can be hand tightened, or use a coin/flathead screwdriver.
Sources:
- The original pinecone model was scanned by scobo and can be downloaded here: https://www.thingiverse.com/thing:1494252
If you like this concept, I have two others:
- Rock: https://www.printables.com/model/295199-scent-trainer-rock
- Magnetic: https://www.printables.com/model/295198-scent-trainer-magnetic
Updates:
- 2022-10-19: Updated to r2, which is 10% larger (cap is identical). The cavity was a bit too close to the edge and sometimes left an unexpected gap during printing.
- 2022-10-30: Added a larger version that is 30% higher. There is a photo showing both side-by-side.